Skip to content

Belpre Police Frequencies

Belpre in Washington County, Ohio has 2 conventional frequencies and 0 trunked talkgroups listed for local agencies. The closest trunked radio site we have is Washington County Simulcast (Ohio MARCS-IP: Multi-Agency Radio Communications), about 14 miles away.

About Belpre Police Frequencies

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Belpre, start with the Washington County Simulcast site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 14 miles away. Its control channels: 773.73125, 774.43125 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Belpre conventional frequencies

Dispatch

Dispatch frequencies for Belpre
AgencyDescriptionFrequency (MHz)ToneModeFCC
Belpre PoliceBelpre Police Department dispatch453.8500
In 458.8500
031 DPLFMNWNKX571

Talk-around & Car-to-Car

Talk-around & Car-to-Car frequencies for Belpre
AgencyDescriptionFrequency (MHz)ToneModeFCC
Belpre PoliceBelpre Police Department Car to Car159.150091.5 PLFM—

Washington County channels that also cover Belpre

Tactical

Tactical frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County SheriffWashington County Sheriff – Dispatch453.6000
In 458.6000
156.7 PLFMNWQBI560
Washington County SheriffWashington County Sheriff – Tactical Channel453.9250
In 458.9250
351 DPLFMNWQBB992

Talk-around & Car-to-Car

Talk-around & Car-to-Car frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County SheriffSheriff interagency39.5800CSQFMKQH450
Washington County SheriffMarietta College Police Department151.865088.5 PLFMKVB968
Washington County SheriffSheriff MRE460.0375100.0 PLFMNKQH450
Washington County SheriffWashington County Sheriff – Alternate465.3625100.0 PLFMNWPBW704

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Washington County SheriffJail transports49007bf6fD
Washington County State CorrectionsAdult Parole Authority – Washington Unit52917ceb5D
1 encrypted talkgroup (cannot be monitored)
Ohio MARCS-IP: Multi-Agency Radio Communications encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Washington County SheriffWashington County Sheriff – Dispatch54865d651D Encrypted

Nearest trunked radio sites

Distances are measured from the center of Belpre.

Washington County Simulcast · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 3 · Site 7 (hex 7) · NAC 347 · about 14 mi away
Control 773.73125, 774.43125
Voice 772.28125, 772.88125, 773.13125, 773.38125
Portland (Coolville) · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 3 · Site 56 (hex 38) · NAC 347 · about 15 mi away
Control 858.9875, 859.9875
Voice 853.3, 853.5, 853.975
McKenzie Ridge (Racine) · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 3 · Site 54 (hex 36) · NAC 345 · about 24 mi away
Control 770.83125, 771.95625
Voice 769.35625, 852.05, 853.225, 856.1875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Belpre?

Dispatch channels listed for Belpre: Belpre Police 453.8500 MHz (031 DPL).