Skip to content

Tripp County Police Frequencies

Tripp County in South Dakota has 2 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 47 cities and communities below for local police departments.

About Tripp County Police Frequencies

Quick answer: Dispatch for Tripp County: Tripp County Sheriff 155.4300 MHz, FM, 141.3 PL. Trunked: South Dakota State Radio System, for example Tripp County Sheriff talkgroup 1078 (hex 436).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: South Dakota State Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Tripp County, start with the Winner site of South Dakota State Radio System. Its control channels: 155.565, 156.1125, 157.77 MHz.

Data updated .

Tripp County conventional frequencies

Dispatch

Dispatch frequencies for Tripp County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Tripp County SheriffWinner Police155.4300
In 158.9550
141.3 PLFMWPWG957

Tactical

Tactical frequencies for Tripp County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Tripp County SheriffTripp County Sheriff – Tactical Channel151.2575FMWQOL848

Tripp County trunked talkgroups

South Dakota State Radio System

South Dakota State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Tripp County SheriffLaw 11078436D
Tripp County SheriffLaw 21076434D

Radio system sites in Tripp County

Program the control channel first; your scanner finds the voice channels from it.

Winner · South Dakota State Radio System
RFSS 1 · Site 46 (hex 2E)
Control 155.565, 156.1125, 157.77
Voice 158.49
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Tripp County

Common questions

What frequency do the police use in Tripp County?

Dispatch channels listed for Tripp County: Tripp County Sheriff 155.4300 MHz, FM, 141.3 PL.

What is the sheriff's dispatch frequency in Tripp County?

Tripp County Sheriff 155.4300 MHz, FM, 141.3 PL.

Do the police use a trunked radio system in Tripp County?

Yes. Law-enforcement talkgroups are listed for South Dakota State Radio System: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to police in Tripp County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Tripp County?

For Tripp County, start with the Winner site of South Dakota State Radio System. Its control channels are 155.565, 156.1125, 157.77 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Tripp County police frequencies encrypted?

None of the 2 conventional frequencies listed for Tripp County are marked encrypted.

Are Tripp County police talkgroups encrypted?

None of the 2 talkgroups listed for Tripp County are marked encrypted.