About Hamill Police Frequencies
Quick answer: County-level dispatch that covers Hamill: Tripp County Sheriff 155.4300 MHz, FM, 141.3 PL. Trunked: South Dakota State Radio System, for example Tripp County Sheriff talkgroup 1078 (hex 436).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: South Dakota State Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hamill, start with the Iona site of South Dakota State Radio System, about 13 miles away. Its control channels: 156.015, 159.06, 159.285 MHz.
Data updated .
Tripp County channels that also cover Hamill
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Tripp County Sheriff | Winner Police | 155.4300 In 158.9550 | 141.3 PL | FM | WPWG957 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Tripp County Sheriff | Tripp County Sheriff – Tactical Channel | 151.2575 | FM | WQOL848 |
South Dakota State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Tripp County Sheriff | Law 1 | 1078 | 436 | D |
| Tripp County Sheriff | Law 2 | 1076 | 434 | D |
Nearest trunked radio sites
Distances are measured from the center of Hamill.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Hamill?
We do not have a dispatch channel listed specifically for Hamill. The county sheriff's dispatch channels in the same county: Tripp County Sheriff 155.4300 MHz, FM, 141.3 PL.
Do the police use a trunked radio system in Hamill?
Yes. The county-level systems that cover Hamill are Law-enforcement talkgroups are listed for South Dakota State Radio System: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Hamill?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hamill?
For Hamill, start with the Iona site of South Dakota State Radio System. Its control channels are 156.015, 159.06, 159.285 MHz. Program a control channel first; the scanner finds the voice channels from it.