Skip to content

Mineral Bluff Police Frequencies

We do not have frequencies listed specifically for Mineral Bluff in Fannin County, Georgia yet. Countywide channels for Fannin County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rocky Top (Tennessee Valley Authority - Security and Emergency Management), about 16 miles away.

About Mineral Bluff Police Frequencies

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.

Fannin County channels that also cover Mineral Bluff

Dispatch

Dispatch frequencies for Fannin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fannin County SheriffFannin County Sheriff – Dispatch158.7300
In 154.6500
RAN 36NXDN48KXV315
Fannin County Sheriff OldFannin County Sheriff – Dispatch158.7300
In 154.6500
141.3 PLFMNKXV315

Tactical

Tactical frequencies for Fannin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fannin County Sheriff OldFannin County Sheriff – Tactical Channel155.6250141.3 PLFMNKXV315
Fannin County SheriffFannin County Sheriff – Tactical Channel155.6250NXDN48KXV315
Fannin County Sheriff OldFannin County Sheriff – Tactical Channel157.1250FMNKXV315
Fannin County SheriffFannin County Sheriff – Tactical Channel157.1250NXDN48KXV315

Nearest trunked radio sites

Distances are measured from the center of Mineral Bluff.

Rocky Top · Tennessee Valley Authority - Security and Emergency Management
RFSS 1 · Site 16 (hex 10) · NAC BC6 · about 16 mi away
Control 169.775
Voice 170.05
Habersham Co Simulcast · Northeast Georgia Area Regional Radio Network
RFSS 10 · Site 10 (hex A) · NAC 125 · about 45 mi away
Control 854.5, 854.875, 856.225, 856.475, 856.875
System Operations Center · Tennessee Valley Authority - Security and Emergency Management
RFSS 1 · Site 45 (hex 2D) · about 47 mi away
Control 406.3125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Mineral Bluff?

We do not have a dispatch channel listed specifically for Mineral Bluff. County-level dispatch channels in the same county: Fannin County Sheriff 158.7300 MHz (RAN 36).