Skip to content

McCaysville Police Frequencies

McCaysville in Fannin County, Georgia has 1 conventional frequency and 0 trunked talkgroups listed for local agencies. The closest trunked radio site we have is Rocky Top (Tennessee Valley Authority - Security and Emergency Management), about 21 miles away.

About McCaysville Police Frequencies

Quick answer: County-level dispatch that covers McCaysville: Fannin County Sheriff 158.7300 MHz, NXDN48, RAN 36.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 4 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

McCaysville conventional frequencies

Dispatch

Dispatch frequencies for McCaysville
AgencyDescriptionFrequency (MHz)ToneModeFCC
McCaysville PoliceMcCaysville Police – Dispatch154.2575
In 159.2025
RAN 36NXDN48 EncryptedWRBK668

Fannin County channels that also cover McCaysville

Dispatch

Dispatch frequencies for Fannin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fannin County SheriffFannin County Sheriff – Dispatch158.7300
In 154.6500
RAN 36NXDN48KXV315
Fannin County Sheriff OldFannin County Sheriff – Dispatch158.7300
In 154.6500
141.3 PLFMNKXV315

Tactical

Tactical frequencies for Fannin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fannin County Sheriff OldFannin County Sheriff – Tactical Channel155.6250141.3 PLFMNKXV315
Fannin County SheriffFannin County Sheriff – Tactical Channel155.6250NXDN48KXV315
Fannin County Sheriff OldFannin County Sheriff – Tactical Channel157.1250FMNKXV315
Fannin County SheriffFannin County Sheriff – Tactical Channel157.1250NXDN48KXV315

Nearest trunked radio sites

Distances are measured from the center of McCaysville.

Rocky Top · Tennessee Valley Authority - Security and Emergency Management
RFSS 1 · Site 16 (hex 10) · NAC BC6 · about 21 mi away
Control 169.775
Voice 170.05
System Operations Center · Tennessee Valley Authority - Security and Emergency Management
RFSS 1 · Site 45 (hex 2D) · about 40 mi away
Control 406.3125
Sequoyah Nuclear Power Plant · Tennessee Valley Authority - Security and Emergency Management
RFSS 1 · Site 4 (hex 4) · NAC BC4 · about 44 mi away
Control 169.775
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in McCaysville?

We do not have a dispatch channel listed specifically for McCaysville. The county sheriff's dispatch channels in the same county: Fannin County Sheriff 158.7300 MHz, NXDN48, RAN 36.

What scanner do I need to listen to police in McCaysville?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in McCaysville?

For McCaysville, start with the Rocky Top site of Tennessee Valley Authority - Security and Emergency Management. Its control channels are 169.775 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are McCaysville police frequencies encrypted?

1 of the 1 conventional frequencies listed for McCaysville are marked encrypted; a scanner cannot decode encrypted audio.