About Seville Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
Wilcox County channels that also cover Seville
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilcox County Sheriff | Wilcox County Sheriff – Dispatch | 154.0250 In 158.9700 | 265 DPL | FMN | WPET835 |
Nearest trunked radio sites
Distances are measured from the center of Seville.
Cordele · Crisp County Public Safety (P25)
Project 25 · RFSS 1 · Site 2 (hex 2) · NAC 940 · about 11 mi away
Control 856.7875, 857.3375
Voice 854.9375, 854.9625, 855.4625, 856.8125
Hawkinsville · Pulaski County Public Safety
Site 1 (hex 1) · about 23 mi away
Voice 154.295
Leslie · Sumter County Public Safety
Site 2 (hex 2) · about 24 mi away
Control 151.4825
Voice 151.0175, 159.2025, 159.465
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Seville?
We do not have a dispatch channel listed specifically for Seville. County-level dispatch channels in the same county: Wilcox County Sheriff 154.0250 MHz (265 DPL).