About Abbeville Police Frequencies
Quick answer: County-level dispatch that covers Abbeville: Wilcox County Sheriff 154.0250 MHz, narrow FM, 265 DPL.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
Data updated .
Wilcox County channels that also cover Abbeville
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilcox County Sheriff | Wilcox County Sheriff – Dispatch | 154.0250 In 158.9700 | 265 DPL | FMN | WPET835 |
Nearest trunked radio sites
Distances are measured from the center of Abbeville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Abbeville?
We do not have a dispatch channel listed specifically for Abbeville. The county sheriff's dispatch channels in the same county: Wilcox County Sheriff 154.0250 MHz, narrow FM, 265 DPL.
What scanner do I need to listen to police in Abbeville?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Abbeville?
For Abbeville, start with the Cordele site of Crisp County Public Safety (P25). Its control channels are 856.7875, 857.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.