About Grassy Fork Police Frequencies
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Grassy Fork, start with the Brownstown site of Indiana Project Hoosier SAFE-T, about 8 miles away. Its control channels: 854.3875 MHz.
Jackson County channels that also cover Grassy Fork
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jackson County Sheriff | Jail | 154.7400 In 158.7300 | FMN | WPQJ422 | |
| Jackson County Sheriff | Juvenile Detention Center | 155.6250 In 158.9700 | 043 DPL | FMN | WPQJ422 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Jackson County Sheriff | Jackson County Sheriff – Dispatch | 21385 | 5389 | D |
| Jackson County Sheriff | Sheriff Operations | 21386 | 538a | D |
| Jackson County Sheriff | Sheriff Operations | 21387 | 538b | D |
Nearest trunked radio sites
Distances are measured from the center of Grassy Fork.
Brownstown · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 49 (hex 31) · NAC 6B4 · about 8 mi away
Control 854.3875
Voice 851.225, 852.9375, 853.0375, 853.2875, 854.1125
Fleenortown · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 50 (hex 32) · NAC 6B8 · about 10 mi away
Control 853.4625, 855.7125
Voice 851.3125, 851.725, 852.95
Seymour · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 32 (hex 20) · NAC 6B9 · about 13 mi away
Control 853.9125
Voice 851.4625, 852.4125, 852.8875, 853.3625, 856.7125
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.