Skip to content

Leonardsville Police Frequencies

We do not have frequencies listed specifically for Leonardsville in Traverse County, Minnesota yet. Countywide channels for Traverse County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Johnson (Allied Radio Matrix for Emergency Response (ARMER)), about 6 miles away.

About Leonardsville Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Leonardsville, start with the Johnson site of Allied Radio Matrix for Emergency Response (ARMER), about 6 miles away. Its control channels: 854.9625, 856.7375 MHz.
  • 2 listed entries are marked encrypted. No scanner can decode encrypted audio.

Traverse County channels that also cover Leonardsville

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Traverse County SheriffLaw Dispatch267086854D
2 encrypted talkgroups (cannot be monitored)
Allied Radio Matrix for Emergency Response (ARMER) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Traverse County SheriffLaw Tactical267096855D Encrypted
Traverse County SheriffLaw Tactical267106856D Encrypted

Nearest trunked radio sites

Distances are measured from the center of Leonardsville.

Johnson · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 26 (hex 1A) · NAC 406 · about 6 mi away
Control 854.9625, 856.7375
Voice 857.7375, 858.7375, 859.7375, 860.7375
Dumont · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 78 (hex 4E) · NAC 403 · about 11 mi away
Control 851.45, 851.875
Voice 853.45, 858.9625, 859.9625
Herman · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 7 (hex 7) · NAC 408 · about 15 mi away
Control 857.4625, 859.4625
Voice 851.125, 855.4625, 856.9375, 858.4625, 860.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.