About Bertie County Police Frequencies
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Bertie County, start with the Windsor site of North Carolina VIPER. Its control channels: 855.2375, 857.9875 MHz.
Bertie County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bertie County Sheriff | Bertie County Sheriff – Dispatch – Patched to VIPER | 155.6700 In 154.8900 | 107.2 PL | FMN | KH9230 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bertie County Sheriff | Private | 155.6450 | 107.2 PL | FMN | — |
Bertie County trunked talkgroups
North Carolina VIPER
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Bertie County Sheriff | Law Dispatch | 4904 | 1328 | D |
| Bertie County Sheriff | Law Tactical | 4905 | 1329 | D |
| Bertie County Sheriff | Detectives | 4906 | 132a | D |
| Bertie County Sheriff | Law Tactical | 4912 | 1330 | D |
Radio system sites in Bertie County
Program the control channel first; your scanner finds the voice channels from it.
Windsor · North Carolina VIPER
RFSS 3 · Site 71 (hex 47) · NAC 1F0
Control 855.2375, 857.9875
Voice 851.0375, 851.5375, 852.4125, 852.875, 853.875
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Bertie County
Common questions
What frequency do the police use in Bertie County?
Dispatch channels listed for Bertie County: Bertie County Sheriff 155.6700 MHz (107.2 PL).
Are Bertie County police talkgroups encrypted?
None of the 4 talkgroups listed for Bertie County are marked encrypted.