Skip to content

Roxobel Police Frequencies

We do not have frequencies listed specifically for Roxobel in Bertie County, North Carolina yet. Countywide channels for Bertie County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Old Mill (North Carolina VIPER), about 14 miles away.

About Roxobel Police Frequencies

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Roxobel, start with the Old Mill site of North Carolina VIPER, about 14 miles away. Its control channels: 852.8875, 853.8875 MHz.

Bertie County channels that also cover Roxobel

Dispatch

Dispatch frequencies for Bertie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bertie County SheriffBertie County Sheriff – Dispatch – Patched to VIPER155.6700
In 154.8900
107.2 PLFMNKH9230

Tactical

Tactical frequencies for Bertie County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bertie County SheriffPrivate155.6450107.2 PLFMN—

North Carolina VIPER

North Carolina VIPER talkgroups
AgencyDescriptionTalkgroupHexMode
Bertie County SheriffLaw Dispatch49041328D
Bertie County SheriffLaw Tactical49051329D
Bertie County SheriffDetectives4906132aD
Bertie County SheriffLaw Tactical49121330D

Nearest trunked radio sites

Distances are measured from the center of Roxobel.

Old Mill · North Carolina VIPER
RFSS 3 · Site 47 (hex 2F) · NAC 1F1 · about 14 mi away
Control 852.8875, 853.8875
Voice 851.4375, 851.75, 852.575
Scotland Neck · North Carolina VIPER
RFSS 3 · Site 75 (hex 4B) · NAC 1F0 · about 16 mi away
Control 773.65625, 774.43125
Voice 771.04375, 771.71875, 772.30625, 772.63125, 773.40625
Ahoskie · North Carolina VIPER
RFSS 3 · Site 1 (hex 1) · NAC 1F0 · about 17 mi away
Control 852.425, 853.5625, 853.7125
Voice 851.15, 851.675, 851.975
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Roxobel?

We do not have a dispatch channel listed specifically for Roxobel. County-level dispatch channels in the same county: Bertie County Sheriff 155.6700 MHz (107.2 PL).