Skip to content

Swan Quarter Police Frequencies

We do not have frequencies listed specifically for Swan Quarter in Hyde County, North Carolina yet. Countywide channels for Hyde County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rose Bay (North Carolina VIPER), about 5 miles away.

About Swan Quarter Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Swan Quarter, start with the Rose Bay site of North Carolina VIPER, about 5 miles away. Its control channels: 852.4625, 853.8875 MHz.

Hyde County channels that also cover Swan Quarter

North Carolina VIPER

AgencyDescriptionTalkgroupHexMode
Hyde County SheriffHyde County Sheriff Main245005fb4D
Hyde County SheriffHyde County Sheriff Operations245065fbaD
Hyde County SheriffHyde County Sheriff Administration245055fb9D

Nearest trunked radio sites

Distances are measured from the center of Swan Quarter.

Rose Bay · North Carolina VIPER
RFSS 3 · Site 55 (hex 37) · NAC 1F1 · about 5 mi away
Control 852.4625, 853.8875
Voice 851.4125, 851.95, 856.6125
Ponzor · North Carolina VIPER
RFSS 3 · Site 51 (hex 33) · NAC 1F0 · about 16 mi away
Control 852.325, 853.825
Voice 851.175, 851.6375, 851.9375
Engelhard · North Carolina VIPER
RFSS 3 · Site 21 (hex 15) · about 21 mi away
Control 853.975
Voice 851.3375, 851.7375, 852.05, 852.975
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.