Skip to content

Sampson County Police Frequencies

Sampson County in North Carolina has 0 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 18 cities and communities below for local police departments.

About Sampson County Police Frequencies

  • Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Sampson County, start with the Newton Grove site of North Carolina VIPER. Its control channels: 853.625, 853.775 MHz.
  • 3 listed entries are marked encrypted. No scanner can decode encrypted audio.

Sampson County trunked talkgroups

North Carolina VIPER

AgencyDescriptionTalkgroupHexMode
Sampson County SheriffSampson County Sheriff – Dispatch41512a228D
Sampson County SheriffSampson SID41516a22cD
Sampson County SheriffSampson Command Staff41509a225D
3 encrypted talkgroups (cannot be monitored)
AgencyDescriptionTalkgroupHexMode
Sampson County SheriffSampson CID41511a227D
Sampson County SheriffSheriffs Office HEAT41513a229D
Sampson County SheriffSampson Patrol41514a22aD

Radio system sites in Sampson County

Program the control channel first; your scanner finds the voice channels from it.

Newton Grove · North Carolina VIPER
RFSS 1 · Site 36 (hex 24) · NAC 1F2
Control 853.625, 853.775
Voice 851.275, 852.275, 852.825, 853.05
Salemburg · North Carolina VIPER
RFSS 3 · Site 56 (hex 38) · NAC 1F3
Control 852.775, 853.875
Voice 851.55, 851.8625, 852.4375
Taylors Bridge · North Carolina VIPER
RFSS 3 · Site 65 (hex 41) · NAC 1F0
Control 853.075, 853.325
Voice 851.175, 851.4875, 851.9, 852.55, 852.85
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Sampson County

Common questions

Are Sampson County police talkgroups encrypted?

3 of the 6 talkgroups listed for Sampson County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.