About Dale Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
Burke County channels that also cover Dale
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Burke County Sheriff | Sheriff / Roads / Busses | 154.0550 In 153.7400 | FMN | KBF912 |
Nearest trunked radio sites
Distances are measured from the center of Dale.
Columbus · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 11 (hex B) · NAC A60 · about 16 mi away
Control 852.0875, 852.3125
Voice 851.8125
Crosby · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 0 · Site 213 (hex D5) · about 33 mi away
Voice 851.9375, 852.2125, 852.4375
Mohall · North Dakota Statewide Interoperable Radio Network (SIRN 20/20)
RFSS 1 · Site 30 (hex 1E) · NAC A6D · about 36 mi away
Control 852.1125, 852.3375
Voice 851.8375
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.