About Greene County Police Frequencies
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Greene County, start with the Arba site of North Carolina VIPER. Its control channels: 853.25, 853.575 MHz.
Greene County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greene County Sheriff | Greene County Sheriff Dispatch | 155.6400 In 156.1500 | 103.5 PL | FM | KIM262 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greene County Sheriff | Greene County Sheriff | 155.6400 | 103.5 PL | FM | KIM262 |
| Greene County Sheriff | Greene County Sheriff | 155.9700 | 103.5 PL | FM | KIM262 |
Greene County trunked talkgroups
North Carolina VIPER
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Greene County Sheriff | Greene County Sheriff – Dispatch | 20505 | 5019 | D |
| Greene County Sheriff | Sheriff Administration | 20506 | 501a | D |
| Greene County Sheriff | Sheriff Investigation | 20507 | 501b | D |
| Greene County Sheriff | Sheriff Narcotics | 20508 | 501c | D |
Radio system sites in Greene County
Program the control channel first; your scanner finds the voice channels from it.
Arba · North Carolina VIPER
RFSS 3 · Site 2 (hex 2) · NAC 1F2
Control 853.25, 853.575
Voice 851.9875, 856.0375, 857.0375, 858.0375
Farmville · North Carolina VIPER
RFSS 3 · Site 23 (hex 17)
Control 853.1, 853.6125
Voice 851.05, 851.575, 851.8375, 852.1, 852.6
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Greene County
Common questions
What frequency do the police use in Greene County?
Dispatch channels listed for Greene County: Greene County Sheriff 155.6400 MHz (103.5 PL).
Are Greene County police talkgroups encrypted?
None of the 4 talkgroups listed for Greene County are marked encrypted.