About Walstonburg Police Frequencies
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Walstonburg, start with the Farmville site of North Carolina VIPER, about 6 miles away. Its control channels: 853.1, 853.6125 MHz.
Greene County channels that also cover Walstonburg
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greene County Sheriff | Greene County Sheriff Dispatch | 155.6400 In 156.1500 | 103.5 PL | FM | KIM262 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greene County Sheriff | Greene County Sheriff | 155.6400 | 103.5 PL | FM | KIM262 |
| Greene County Sheriff | Greene County Sheriff | 155.9700 | 103.5 PL | FM | KIM262 |
North Carolina VIPER
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Greene County Sheriff | Greene County Sheriff – Dispatch | 20505 | 5019 | D |
| Greene County Sheriff | Sheriff Administration | 20506 | 501a | D |
| Greene County Sheriff | Sheriff Investigation | 20507 | 501b | D |
| Greene County Sheriff | Sheriff Narcotics | 20508 | 501c | D |
Nearest trunked radio sites
Distances are measured from the center of Walstonburg.
Farmville · North Carolina VIPER
RFSS 3 · Site 23 (hex 17) · about 6 mi away
Control 853.1, 853.6125
Voice 851.05, 851.575, 851.8375, 852.1, 852.6
Fountain · North Carolina VIPER
RFSS 3 · Site 73 (hex 49) · NAC 1F0 · about 8 mi away
Control 772.05625, 774.04375
Voice 769.35625, 770.03125, 770.35625, 770.75625, 771.08125, 771.48125, 773.06875
Dodge City · North Carolina VIPER
RFSS 3 · Site 17 (hex 11) · NAC 1FC · about 14 mi away
Control 852.1125, 853.975
Voice 851.1125, 851.475, 852.6625, 855.7375, 857.0625
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Walstonburg?
We do not have a dispatch channel listed specifically for Walstonburg. County-level dispatch channels in the same county: Greene County Sheriff 155.6400 MHz (103.5 PL).