Skip to content

Maury Police Frequencies

We do not have frequencies listed specifically for Maury in Greene County, North Carolina yet. Countywide channels for Greene County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Farmville (North Carolina VIPER), about 5 miles away.

About Maury Police Frequencies

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: North Carolina VIPER: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Maury, start with the Farmville site of North Carolina VIPER, about 5 miles away. Its control channels: 853.1, 853.6125 MHz.

Greene County channels that also cover Maury

Dispatch

AgencyDescriptionFrequency (MHz)ToneModeFCC
Greene County SheriffGreene County Sheriff Dispatch155.6400
In 156.1500
103.5 PLFMKIM262

Tactical

AgencyDescriptionFrequency (MHz)ToneModeFCC
Greene County SheriffGreene County Sheriff155.6400103.5 PLFMKIM262
Greene County SheriffGreene County Sheriff155.9700103.5 PLFMKIM262

North Carolina VIPER

AgencyDescriptionTalkgroupHexMode
Greene County SheriffGreene County Sheriff – Dispatch205055019D
Greene County SheriffSheriff Administration20506501aD
Greene County SheriffSheriff Investigation20507501bD
Greene County SheriffSheriff Narcotics20508501cD

Nearest trunked radio sites

Distances are measured from the center of Maury.

Farmville · North Carolina VIPER
RFSS 3 · Site 23 (hex 17) · about 5 mi away
Control 853.1, 853.6125
Voice 851.05, 851.575, 851.8375, 852.1, 852.6
Arba · North Carolina VIPER
RFSS 3 · Site 2 (hex 2) · NAC 1F2 · about 9 mi away
Control 853.25, 853.575
Voice 851.9875, 856.0375, 857.0375, 858.0375
Kinston · North Carolina VIPER
RFSS 3 · Site 33 (hex 21) · NAC 1F2 · about 14 mi away
Control 853.4125, 853.7375
Voice 851.6875, 852.4125, 852.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Maury?

We do not have a dispatch channel listed specifically for Maury. County-level dispatch channels in the same county: Greene County Sheriff 155.6400 MHz (103.5 PL).