About Duncan Police Frequencies
Quick answer: County-level dispatch that covers Duncan: Greenlee County Sheriff 155.0925 MHz, P25, no tone.
- 4 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Greenlee County channels that also cover Duncan
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greenlee County Sheriff | Rose Peak | 155.0925 | P25 | WQFR547 | |
| Greenlee County Sheriff | Clifton | 155.6400 | NAC 555 | P25 | WQFR547 |
| Greenlee County Sheriff | Alpine | 155.7675 | P25 | WQFR547 | |
| Greenlee County Sheriff | Guthrie Peak | 156.1725 In 159.3600 | NAC 555 | P25 | WQFR547 |
Nearest trunked radio sites
Distances are measured from the center of Duncan.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Duncan?
We do not have a dispatch channel listed specifically for Duncan. The county sheriff's dispatch channels in the same county: Greenlee County Sheriff 155.0925 MHz, P25, no tone.
What scanner do I need to listen to police in Duncan?
A scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Duncan?
For Duncan, start with the FCI Safford site of Federal Correctional Institution Safford. Its control channels are 407.0125, 408.4, 409.4125, 410 MHz. Program a control channel first; the scanner finds the voice channels from it.