About Batesville Police Frequencies
Quick answer: County-level dispatch that covers Batesville: Independence County Sheriff 154.9800 MHz, narrow FM, 146.2 PL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
- 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Batesville conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Batesville Police | Primary (Scrambled) | 155.9400 In 159.1875 | RAN 10 | NXDN48 Encrypted | WQVR896 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Batesville Police | Batesville Police – Alternate (Scrambled) | 155.2575 In 158.7450 | RAN 10 | NXDN48 Encrypted | WQVR896 |
Independence County channels that also cover Batesville
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Independence County Sheriff | Main Dispatch (Channel 1) | 154.9800 In 158.9250 | 146.2 PL | FMN | WNLK692 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Independence County Sheriff | Independence County Sheriff – Tactical Channel (Channel 3) | 155.5650 In 158.7600 | 146.2 PL | FMN Encrypted | WNLK692 |
Talk-around & Car-to-Car
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Independence County Sheriff | Car-to-Car (Channel 5) | 151.0400 | 146.2 PL | FMN | WNLK692 |
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Independence County Sheriff | Jail Operations | 155.1300 | 146.2 PL | FMN | WNLK692 |
Nearest trunked radio sites
Distances are measured from the center of Batesville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Batesville?
We do not have a dispatch channel listed specifically for Batesville. The county sheriff's dispatch channels in the same county: Independence County Sheriff 154.9800 MHz, narrow FM, 146.2 PL.
What scanner do I need to listen to police in Batesville?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Batesville?
For Batesville, start with the Batesville site of Arkansas Wireless Information Network (AWIN). Its control channels are 851.4, 851.675 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Batesville police frequencies encrypted?
2 of the 2 conventional frequencies listed for Batesville are marked encrypted; a scanner cannot decode encrypted audio.