About Pyatt Police Frequencies
Quick answer: County-level dispatch that covers Pyatt: Marion County Sheriff 460.4500 MHz, narrow FM, 132 DPL.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Marion County channels that also cover Pyatt
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marion County Sheriff Old | Marion County Sheriff – Dispatch (Licensed to Fire) | 154.7925 In 155.3100 | CC 1 · TG 1 · SL 1 | DMR | WQYW296 |
| Marion County Sheriff | Marion County Sheriff – Dispatch | 460.4500 In 465.4500 | 132 DPL | FMN | WRZV634 |
Nearest trunked radio sites
Distances are measured from the center of Pyatt.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Pyatt?
We do not have a dispatch channel listed specifically for Pyatt. The county sheriff's dispatch channels in the same county: Marion County Sheriff 460.4500 MHz, narrow FM, 132 DPL.
What scanner do I need to listen to police in Pyatt?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Pyatt?
For Pyatt, start with the Tar Kiln (Pyatt) site of Arkansas Wireless Information Network (AWIN). Its control channels are 851.9, 852.175 MHz. Program a control channel first; the scanner finds the voice channels from it.