About Montgomery County Police Frequencies
Quick answer: Dispatch for Montgomery County: Montgomery County Sheriff 155.5950 MHz, narrow FM, 100.0 PL. Trunked: Arkansas Wireless Information Network (AWIN), for example Montgomery County Sheriff talkgroup 21801 (hex 5529).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: Arkansas Wireless Information Network (AWIN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Montgomery County, start with the High Peak site of Arkansas Wireless Information Network (AWIN). Its control channels: 852.7875, 853.8875 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Montgomery County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County Sheriff | Montgomery County Sheriff – Dispatch | 155.5950 In 158.9100 | 100.0 PL | FMN | KNIM472 |
| Montgomery County Sheriff Backup | Montgomery County Sheriff – Dispatch | 155.5950 In 158.9100 | NXDN48 Encrypted | KNIM472 |
Montgomery County trunked talkgroups
Arkansas Wireless Information Network (AWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Montgomery County Sheriff | Montgomery County Sheriff – Dispatch | 21801 | 5529 | D |
Radio system sites in Montgomery County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Montgomery County
Common questions
What frequency do the police use in Montgomery County?
Dispatch channels listed for Montgomery County: Montgomery County Sheriff 155.5950 MHz, narrow FM, 100.0 PL.
What is the sheriff's dispatch frequency in Montgomery County?
Montgomery County Sheriff 155.5950 MHz, narrow FM, 100.0 PL.
Do the police use a trunked radio system in Montgomery County?
Yes. Law-enforcement talkgroups are listed for Arkansas Wireless Information Network (AWIN): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to police in Montgomery County?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Montgomery County?
For Montgomery County, start with the High Peak site of Arkansas Wireless Information Network (AWIN). Its control channels are 852.7875, 853.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Montgomery County police frequencies encrypted?
1 of the 2 conventional frequencies listed for Montgomery County are marked encrypted; a scanner cannot decode encrypted audio.
Are Montgomery County police talkgroups encrypted?
None of the 1 talkgroups listed for Montgomery County are marked encrypted.