About Highland Police Frequencies
Quick answer: County-level dispatch that covers Highland: Sharp County Sheriff 155.5200 MHz, NXDN48, RAN 30.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
Data updated .
Sharp County channels that also cover Highland
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sharp County Sheriff Old | Sharp County Sheriff – Dispatch | 155.5200 In 158.8500 | 127.3 PL | FMN | WNRC884 |
| Sharp County Sheriff | Sheriff/Local Law – Dispatch | 155.5200 In 158.8500 | RAN 30 | NXDN48 | WNRC884 |
| Sharp County Sheriff | Vehicular Repeater/RF Link | 460.3250 | CSQ | FMN | WNRC884 |
Nearest trunked radio sites
Distances are measured from the center of Highland.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Highland?
We do not have a dispatch channel listed specifically for Highland. The county sheriff's dispatch channels in the same county: Sharp County Sheriff 155.5200 MHz, NXDN48, RAN 30.
What scanner do I need to listen to police in Highland?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Highland?
For Highland, start with the Big Lick Hill (Ravenden) site of Arkansas Wireless Information Network (AWIN). Its control channels are 851.425, 851.875 MHz. Program a control channel first; the scanner finds the voice channels from it.