About Brooker Police Frequencies
Quick answer: County-level dispatch that covers Brooker: Bradford County Sheriff 154.7400 MHz, FM, 156.7 PL. Trunked: Statewide Law Enforcement Radio System (EDACS), for example Bradford County Sheriff talkgroup 1538 (hex 602).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Statewide Law Enforcement Radio System (EDACS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Brooker, start with the Starke site of Statewide Law Enforcement Radio System (EDACS), about 14 miles away. Its control channels: 851.9875, 854.075, 854.1 MHz.
Data updated .
Bradford County channels that also cover Brooker
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bradford County Sheriff | Sheriff Primary | 154.7400 In 155.8350 | 156.7 PL | FM | WQH444 |
Statewide Law Enforcement Radio System (EDACS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Bradford County Sheriff | Bradford County Sheriff – Dispatch | 1538 | 602 | D |
Nearest trunked radio sites
Distances are measured from the center of Brooker.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Brooker?
We do not have a dispatch channel listed specifically for Brooker. The county sheriff's dispatch channels in the same county: Bradford County Sheriff 154.7400 MHz, FM, 156.7 PL.
Do the police use a trunked radio system in Brooker?
Yes. The county-level systems that cover Brooker are Law-enforcement talkgroups are listed for Statewide Law Enforcement Radio System (EDACS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to police in Brooker?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Brooker?
For Brooker, start with the Starke site of Statewide Law Enforcement Radio System (EDACS). Its control channels are 851.9875, 854.075, 854.1, 854.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.