About Quincy Police Frequencies
Quick answer: Dispatch for Quincy: Quincy Police 453.3000 MHz, FM, 125 DPL. Trunked: Gadsden County Public Safety, for example Gadsden County Sheriff talkgroup 10000 (hex 2710).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Gadsden County Public Safety: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Quincy, start with the Midway site of Gadsden County Public Safety, about 1 miles away. Its control channels: 460.0875 MHz.
Data updated .
Quincy conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Quincy Police | Quincy Police – Dispatch | 453.3000 In 458.3000 | 125 DPL | FM | KIB807 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Quincy Police | Public Safety | 460.3750 In 465.3750 | 179.9 PL | FM | KIB807 |
Gadsden County channels that also cover Quincy
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gadsden County Sheriff | Gadsden County Sheriff – Dispatch | 453.1250 In 458.1250 | 179.9 PL | FM | KIK393 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gadsden County Sheriff | Gadsden County Sheriff – Tactical Channel | 460.4500 In 465.4500 | 179.9 PL | FM | KIK393 |
Gadsden County Public Safety
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Gadsden County Sheriff | Sheriffs Office Dispatch | 10000 | 2710 | T |
| Gadsden County Sheriff | Quincy Public Safety | 12200 | 2fa8 | T |
| Gadsden County Sheriff | County Jail | 10007 | 2717 | T |
Nearest trunked radio sites
Distances are measured from the center of Quincy.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Quincy?
Dispatch channels listed for Quincy: Quincy Police 453.3000 MHz, FM, 125 DPL.
Do the police use a trunked radio system in Quincy?
Yes. The county-level systems that cover Quincy are Law-enforcement talkgroups are listed for Gadsden County Public Safety: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Quincy?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Quincy?
For Quincy, start with the Midway site of Gadsden County Public Safety. Its control channels are 460.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Quincy police frequencies encrypted?
None of the 2 conventional frequencies listed for Quincy are marked encrypted.