Meigs also extends into Thomas County.
About Meigs Police Frequencies
Quick answer: County-level dispatch that covers Meigs: Mitchell County Sheriff 155.6400 MHz, narrow FM, 179.9 PL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Southwest Georgia Regional Radio System: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Meigs, start with the Mitchell Co. Simulcast site of Southwest Georgia Regional Radio System, about 15 miles away. Its control channels: 855.3875, 856.0375 MHz.
- 7 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Mitchell County channels that also cover Meigs
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mitchell County Sheriff | Mitchell County Sheriff – Dispatch | 155.6400 In 156.0900 | 179.9 PL | FMN | KNJU644 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mitchell County Sheriff | Mitchell County Sheriff – Tactical Channel | 154.7100 | FMN | KNJU644 | |
| Mitchell County Sheriff | Mitchell County Sheriff – Alternate | 155.6700 | FMN | WNZR482 |
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Mitchell County Sheriff | Corrections Division | 153.9650 In 156.1375 | FMN | KNGH285 | |
| Mitchell County Sheriff | Jail Operations | 460.1000 In 465.1000 | 179.9 PL | FMN | KNJU644 |
Southwest Georgia Regional Radio System
7 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Mitchell County Sheriff | Public Safety 3301 | 3301 | ce5 | T Encrypted |
| Mitchell County Sheriff | Public Safety 3401 | 3401 | d49 | T Encrypted |
| Mitchell County Sheriff | Public Safety 3405 | 3405 | d4d | T Encrypted |
| Mitchell County Sheriff | Public Safety 3493 | 3493 | da5 | T Encrypted |
| Mitchell County Sheriff | Public Safety 3494 | 3494 | da6 | T Encrypted |
| Mitchell County Sheriff | Public Safety 3500 | 3500 | dac | T Encrypted |
| Mitchell County Sheriff | Public Safety 3504 | 3504 | db0 | T Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Meigs.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Meigs?
We do not have a dispatch channel listed specifically for Meigs. The county sheriff's dispatch channels in the same county: Mitchell County Sheriff 155.6400 MHz, narrow FM, 179.9 PL.
Do the police use a trunked radio system in Meigs?
Yes. The county-level systems that cover Meigs are Law-enforcement talkgroups are listed for Southwest Georgia Regional Radio System: 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Meigs?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Meigs?
For Meigs, start with the Mitchell Co. Simulcast site of Southwest Georgia Regional Radio System. Its control channels are 855.3875, 856.0375 MHz. Program a control channel first; the scanner finds the voice channels from it.