About Lexington Police Frequencies
Quick answer: County-level dispatch that covers Lexington: Oglethorpe County Sheriff 155.4150 MHz, DMR, CC 13 · TG 1 · SL 1.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Oglethorpe County channels that also cover Lexington
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Oglethorpe County Sheriff | Oglethorpe County Sheriff – Dispatch | 155.4150 In 159.0150 | CC 13 · TG 1 · SL 1 | DMR | WPSG926 |
Nearest trunked radio sites
Distances are measured from the center of Lexington.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Lexington?
We do not have a dispatch channel listed specifically for Lexington. The county sheriff's dispatch channels in the same county: Oglethorpe County Sheriff 155.4150 MHz, DMR, CC 13 · TG 1 · SL 1.
What scanner do I need to listen to police in Lexington?
A scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Lexington?
For Lexington, start with the Greene/Oconee Co. Simulcast site of Oconee Areawide Radio System (OARS). Its control channels are 769.83125, 770.00625, 771.03125 MHz. Program a control channel first; the scanner finds the voice channels from it.