About Iron City Police Frequencies
Quick answer: County-level dispatch that covers Iron City: Seminole County Sheriff 771.0813 MHz, P25, no tone.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Seminole County channels that also cover Iron City
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seminole County Sheriff | Sherif:f Main Dispatch | 771.0813 In 801.0813 | P25 | WREW817 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seminole County Sheriff | Secondary Simplex | 769.6438 | P25 | — |
Nearest trunked radio sites
Distances are measured from the center of Iron City.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Iron City?
We do not have a dispatch channel listed specifically for Iron City. The county sheriff's dispatch channels in the same county: Seminole County Sheriff 771.0813 MHz, P25, no tone.
What scanner do I need to listen to police in Iron City?
A scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Iron City?
For Iron City, start with the Donalsonville site of Metrolink NXDN. Its control channels are 461.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.