Skip to content

Danville Police Frequencies

We do not have frequencies listed specifically for Danville in Twiggs County, Georgia yet. Countywide channels for Twiggs County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Hawkinsville (Pulaski County Public Safety), about 26 miles away.

Danville also extends into Wilkinson County.

About Danville Police Frequencies

Quick answer: County-level dispatch that covers Danville: Twiggs County Sheriff 155.6400 MHz, narrow FM, 88.5 PL (unconfirmed).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Twiggs County channels that also cover Danville

Dispatch

Dispatch frequencies for Twiggs County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Twiggs County SheriffTwiggs County Sheriff – Dispatch155.6400
In 153.9800
CC 7 · TG 8000 · SL 1DMR EncryptedWNRV889
Twiggs County Sheriff UnconfirmedTwiggs County Sheriff – Dispatch155.6400
In 153.9800
88.5 PLFMNWNRV889

Tactical

Tactical frequencies for Twiggs County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Twiggs County SheriffTalk-Around155.6700FMNKNIC662

Nearest trunked radio sites

Distances are measured from the center of Danville.

Hawkinsville · Pulaski County Public Safety
Site 1 (hex 1) · about 26 mi away
Voice 154.295
Simulcast · Houston County Government (GA)
RFSS 1 · Site 3 (hex 3) · NAC 143 · about 28 mi away
Control 854.7875, 855.2625, 855.5375, 855.9375
Voice 854.5625, 855.0125, 855.7375, 856.3375, 856.4625, 856.9375, 857.3125, 857.4375
Bibb County Simulcast · Central Georgia Interoperable Regional Radio System (CGIRRS)
RFSS 10 · Site 10 (hex A) · NAC 00A · about 29 mi away
Control 854.0625, 854.7125, 855.2375, 855.4875, 855.5875, 855.8875, 855.9875, 856.2375, 856.2625, 856.5875, 856.9875, 857.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Danville?

We do not have a dispatch channel listed specifically for Danville. The county sheriff's dispatch channels in the same county: Twiggs County Sheriff 155.6400 MHz, narrow FM, 88.5 PL (unconfirmed).

What scanner do I need to listen to police in Danville?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Danville?

For Danville, start with the Simulcast site of Houston County Government (GA). Its control channels are 854.7875, 855.2625, 855.5375, 855.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.