About Varnell Police Frequencies
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
Data updated .
Whitfield County channels that also cover Varnell
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Whitfield County Sheriff | Jail | 857.1875 In 812.1875 | 411 DPL | FMN | WQYU585 |
Nearest trunked radio sites
Distances are measured from the center of Varnell.
East Ridge · Tennessee Valley Authority - Security and Emergency Management
RFSS 1 · Site 7 (hex 7) · NAC BC7 · about 17 mi away
Control 172.4375
Sequoyah Nuclear Power Plant · Tennessee Valley Authority - Security and Emergency Management
RFSS 1 · Site 4 (hex 4) · NAC BC4 · about 24 mi away
Control 169.775
System Operations Center · Tennessee Valley Authority - Security and Emergency Management
RFSS 1 · Site 45 (hex 2D) · about 28 mi away
Control 406.3125
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What scanner do I need to listen to police in Varnell?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Varnell?
For Varnell, start with the East Ridge site of Tennessee Valley Authority - Security and Emergency Management. Its control channels are 172.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.