About Portland Police Frequencies
Quick answer: County-level dispatch that covers Portland: Cumberland County Sheriff 151.1075 MHz, narrow FM, 107.2 PL. Trunked: Portland, for example Jetport (KPWM) talkgroup 1139 (hex 473).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: Portland: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Portland, start with the City Center site of Maine State Communications Network (MSCommNet), about 4 miles away. Its control channels: 152.06, 171.1625, 171.3125 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Portland trunked talkgroups
Portland
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Jetport (KPWM) | Jetport Police Operations | 1139 | 473 | D |
| Portland Police | Portland Police – Dispatch | 1003 | 3eb | D |
| Portland Police | Portland Police – Dispatch | 1005 | 3ed | D |
| Portland Police | Portland Police – Tactical Channel(Details) | 1007 | 3ef | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Portland Police | Police Department Encrypted | 1027 | 403 | D Encrypted |
Cumberland County channels that also cover Portland
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cumberland County Sheriff | Sheriff Primary | 151.1075 | 107.2 PL | FMN | WQKL978 |
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cumberland County Sheriff | Cumberland County Jail | 453.0500 In 458.0500 | CC 1 · TG 101 · SL 1 | DMR | WNGY225 |
Nearest trunked radio sites
Distances are measured from the center of Portland.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Portland?
We do not have a dispatch channel listed specifically for Portland. The county sheriff's dispatch channels in the same county: Cumberland County Sheriff 151.1075 MHz, narrow FM, 107.2 PL.
Do the police use a trunked radio system in Portland?
Yes. Law-enforcement talkgroups are listed for Portland: 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Portland?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Portland?
For Portland, start with the City Center site of Maine State Communications Network (MSCommNet). Its control channels are 152.06, 171.1625, 171.3125, 171.625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Portland police talkgroups encrypted?
1 of the 5 talkgroups listed for Portland are marked fully or partly encrypted; a scanner cannot decode encrypted audio.