Skip to content

Industry Police Frequencies

We do not have frequencies listed specifically for Industry in Franklin County, Maine yet. Countywide channels for Franklin County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Eaton Mountain (Maine State Communications Network (MSCommNet)), about 15 miles away.

About Industry Police Frequencies

Quick answer: County-level dispatch that covers Industry: Franklin County Sheriff 155.2500 MHz, narrow FM, 179.9 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Franklin County channels that also cover Industry

Dispatch

Dispatch frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County SheriffMosher Hill155.2500179.9 PLFMNWNGP716
Franklin County SheriffSugarloaf155.2500123.0 PLFMNWPHS315

Nearest trunked radio sites

Distances are measured from the center of Industry.

Eaton Mountain · Maine State Communications Network (MSCommNet)
RFSS 27 · Site 27 (hex 1B) · NAC 1BE · about 15 mi away
Control 160.86, 173.825
Sugarloaf Mountain · Maine State Communications Network (MSCommNet)
RFSS 79 · Site 79 (hex 4F) · NAC 4FE · about 24 mi away
Control 152.7575, 159.06, 172.8125
Cook Hill · Maine State Communications Network (MSCommNet)
RFSS 19 · Site 19 (hex 13) · NAC 13E · about 27 mi away
Control 150.83, 152.7425, 152.78, 153.53, 154.92
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Industry?

We do not have a dispatch channel listed specifically for Industry. The county sheriff's dispatch channels in the same county: Franklin County Sheriff 155.2500 MHz, narrow FM, 179.9 PL.

What scanner do I need to listen to police in Industry?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Industry?

For Industry, start with the Eaton Mountain site of Maine State Communications Network (MSCommNet). Its control channels are 160.86, 173.825 MHz. Program a control channel first; the scanner finds the voice channels from it.