About Gardiner Police Frequencies
Quick answer: Dispatch for Gardiner: Gardiner Police 151.1375 MHz, narrow FM, 186.2 PL. Trunked: Maine State Communications Network (MSCommNet), for example Kennebec County Sheriff talkgroup 816 (hex 330).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: Maine State Communications Network (MSCommNet): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Gardiner, start with the Granite Hill site of Maine State Communications Network (MSCommNet), about 6 miles away. Its control channels: 156.09, 161.04, 161.49 MHz.
Data updated .
Gardiner conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gardiner Police | Gardiner Police – Dispatch | 151.1375 In 153.8300 | 186.2 PL | FMN | WPUK473 |
Kennebec County channels that also cover Gardiner
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kennebec County Sheriff | Kennebec County Sheriff – Dispatch (Patched into MSCommNet TG 816) | 159.0900 In 150.9550 | NAC 770 | P25 | WPFX777 |
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kennebec County Jail | County Jail | 453.6750 | 71.9 PL | FMN | WPFX777 |
Maine State Communications Network (MSCommNet)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Kennebec County Sheriff | County Sheriff Patch to 159.090 | 816 | 330 | D |
Nearest trunked radio sites
Distances are measured from the center of Gardiner.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Gardiner?
Dispatch channels listed for Gardiner: Gardiner Police 151.1375 MHz, narrow FM, 186.2 PL.
Do the police use a trunked radio system in Gardiner?
Yes. The county-level systems that cover Gardiner are Law-enforcement talkgroups are listed for Maine State Communications Network (MSCommNet): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to police in Gardiner?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Gardiner?
For Gardiner, start with the Granite Hill site of Maine State Communications Network (MSCommNet). Its control channels are 156.09, 161.04, 161.49, 165.45 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Gardiner police frequencies encrypted?
None of the 1 conventional frequencies listed for Gardiner are marked encrypted.