About Arrowsic Police Frequencies
Quick answer: County-level dispatch that covers Arrowsic: Sagadahoc County Sheriff 155.0775 MHz, narrow FM, 162.2 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Sagadahoc County channels that also cover Arrowsic
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sagadahoc County Sheriff | Sheriff Operations | 155.0775 In 153.8450 | 162.2 PL | FMN | WNQS881 |
| Sagadahoc County Sheriff | Law Back Up | 155.6850 | 162.2 PL | FMN | KNBB242 |
Nearest trunked radio sites
Distances are measured from the center of Arrowsic.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Arrowsic?
We do not have a dispatch channel listed specifically for Arrowsic. The county sheriff's dispatch channels in the same county: Sagadahoc County Sheriff 155.0775 MHz, narrow FM, 162.2 PL.
What scanner do I need to listen to police in Arrowsic?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Arrowsic?
For Arrowsic, start with the Huntoon Hill site of Maine State Communications Network (MSCommNet). Its control channels are 151.19, 155.55, 157.45 MHz. Program a control channel first; the scanner finds the voice channels from it.