Skip to content

Benton County Police Frequencies

Benton County in Minnesota has 0 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 16 cities and communities below for local police departments.

About Benton County Police Frequencies

Quick answer: Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Benton County Sheriff talkgroup 24900 (hex 6144).

  • Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Benton County, start with the Gilman - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 852.4, 852.725 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Benton County trunked talkgroups

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Benton County SheriffSheriff 1249006144D
Benton County SheriffSheriff 2249026146D
Benton County SheriffSheriff Reserves24910614eD
1 encrypted talkgroup (cannot be monitored)
Allied Radio Matrix for Emergency Response (ARMER) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Benton County SheriffBenton County Sheriff – Tactical Channel24926615eD Encrypted

Radio system sites in Benton County

Program the control channel first; your scanner finds the voice channels from it.

Gilman - Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 49 (hex 31) · NAC 400
Control 852.4, 852.725
Voice 851.425, 851.8, 851.9, 852.275, 852.875, 853.475, 853.525, 853.825
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Benton County

Common questions

Do the police use a trunked radio system in Benton County?

Yes. Law-enforcement talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to police in Benton County?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Benton County?

For Benton County, start with the Gilman - Simulcast site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.4, 852.725 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Benton County police talkgroups encrypted?

1 of the 4 talkgroups listed for Benton County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.