About Chippewa County Police Frequencies
Quick answer: Dispatch for Chippewa County: Chippewa County Sheriff 155.6400 MHz, narrow FM, 94.8 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Chippewa County Sheriff talkgroup 29120 (hex 71c0).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Chippewa County, start with the Granite Falls site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 853.575, 853.825 MHz.
- 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Chippewa County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Chippewa County Sheriff | Sheriff's Department X 4 Locations | 155.6400 In 158.8950 | 94.8 PL | FMN | KNBW384 |
Chippewa County trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Chippewa County Sheriff | Law Dispatch | 29120 | 71c0 | D |
3 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Chippewa County Sheriff | Law 1 | 29121 | 71c1 | D Encrypted |
| Chippewa County Sheriff | Law 2 | 29122 | 71c2 | D Encrypted |
| Chippewa County Sheriff | Law Car to Car | 29123 | 71c3 | D Encrypted |
Radio system sites in Chippewa County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Chippewa County
Common questions
What frequency do the police use in Chippewa County?
Dispatch channels listed for Chippewa County: Chippewa County Sheriff 155.6400 MHz, narrow FM, 94.8 PL.
What is the sheriff's dispatch frequency in Chippewa County?
Chippewa County Sheriff 155.6400 MHz, narrow FM, 94.8 PL.
Do the police use a trunked radio system in Chippewa County?
Yes. Law-enforcement talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Chippewa County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Chippewa County?
For Chippewa County, start with the Granite Falls site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 853.575, 853.825 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Chippewa County police frequencies encrypted?
None of the 1 conventional frequencies listed for Chippewa County are marked encrypted.
Are Chippewa County police talkgroups encrypted?
3 of the 4 talkgroups listed for Chippewa County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.