Skip to content

Harmony Police Frequencies

We do not have frequencies listed specifically for Harmony in Fillmore County, Minnesota yet. Countywide channels for Fillmore County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Harmony (Allied Radio Matrix for Emergency Response (ARMER)), about 1 miles away.

About Harmony Police Frequencies

Quick answer: County-level dispatch that covers Harmony: Fillmore County Sheriff 154.8750 MHz, narrow FM, 110.9 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Fillmore County Sheriff talkgroup 20820 (hex 5154).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Harmony, start with the Harmony site of Allied Radio Matrix for Emergency Response (ARMER), about 1 miles away. Its control channels: 851.9875, 852.325 MHz.

Data updated .

Fillmore County channels that also cover Harmony

Dispatch

Dispatch frequencies for Fillmore County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fillmore County SheriffFillmore County Sheriff – Dispatch154.8750
In 158.9700
110.9 PLFMNWPVZ365

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Fillmore County SheriffLaw Dispatch208205154D
Fillmore County SheriffLaw Dispatch208215155D

Nearest trunked radio sites

Distances are measured from the center of Harmony.

Harmony · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 83 (hex 53) · about 1 mi away
Control 851.9875, 852.325
Voice 851.4375, 851.8, 852.9875
Amherst · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 2 (hex 2) · about 9 mi away
Control 851.4875, 858.9375
Voice 851.9375, 852.9375, 857.2375
Wykoff · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 3 · Site 18 (hex 12) · about 16 mi away
Control 856.9375
Voice 857.7625, 858.2375, 858.7375, 859.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Harmony?

We do not have a dispatch channel listed specifically for Harmony. The county sheriff's dispatch channels in the same county: Fillmore County Sheriff 154.8750 MHz, narrow FM, 110.9 PL.

Do the police use a trunked radio system in Harmony?

Yes. The county-level systems that cover Harmony are Law-enforcement talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to police in Harmony?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Harmony?

For Harmony, start with the Harmony site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 851.9875, 852.325 MHz. Program a control channel first; the scanner finds the voice channels from it.