Skip to content

St. Vincent Police Frequencies

We do not have frequencies listed specifically for St. Vincent in Kittson County, Minnesota yet. Countywide channels for Kittson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Northcote (Allied Radio Matrix for Emergency Response (ARMER)), about 16 miles away.

About St. Vincent Police Frequencies

Quick answer: County-level dispatch that covers St. Vincent: Kittson County Sheriff 155.5200 MHz, narrow FM, 114.8 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Kittson County Sheriff talkgroup 50700 (hex c60c).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For St. Vincent, start with the Northcote site of Allied Radio Matrix for Emergency Response (ARMER), about 16 miles away. Its control channels: 852.1375, 853.125 MHz.

Data updated .

Kittson County channels that also cover St. Vincent

Dispatch

Dispatch frequencies for Kittson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kittson County SheriffSheriff's Department (Hallock)155.5200114.8 PLFMNKAJ661
Kittson County SheriffSheriff's Department (Karlstad)155.7900
In 154.7700
114.8 PLFMNKAJ661

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Kittson County SheriffKittson Dispatch – 155.7900 VHF50700c60cD

Nearest trunked radio sites

Distances are measured from the center of St. Vincent.

Northcote · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 3 (hex 3) · about 16 mi away
Control 852.1375, 853.125
Voice 851.2375, 853.5, 854.2375
Lancaster · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 2 (hex 2) · NAC 407 · about 26 mi away
Control 854.1875, 854.3875
Voice 851.8375, 852.675, 853.15
Lake Bronson · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 6 · Site 1 (hex 1) · about 33 mi away
Control 851.1625, 854.0875
Voice 851.9625, 852.8875, 853.1
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in St. Vincent?

We do not have a dispatch channel listed specifically for St. Vincent. The county sheriff's dispatch channels in the same county: Kittson County Sheriff 155.5200 MHz, narrow FM, 114.8 PL.

Do the police use a trunked radio system in St. Vincent?

Yes. The county-level systems that cover St. Vincent are Law-enforcement talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to police in St. Vincent?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in St. Vincent?

For St. Vincent, start with the Northcote site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.1375, 853.125 MHz. Program a control channel first; the scanner finds the voice channels from it.