Skip to content

Cedar Mills Police Frequencies

We do not have frequencies listed specifically for Cedar Mills in Meeker County, Minnesota yet. Countywide channels for Meeker County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Swift County (Allied Radio Matrix for Emergency Response (ARMER)), about 5 miles away.

About Cedar Mills Police Frequencies

Quick answer: Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Meeker County Sheriff talkgroup 25500 (hex 639c).

  • Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Cedar Mills, start with the Swift County site of Allied Radio Matrix for Emergency Response (ARMER), about 5 miles away. Its control channels: 854.9875 MHz.
  • 7 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Meeker County channels that also cover Cedar Mills

Allied Radio Matrix for Emergency Response (ARMER)

Allied Radio Matrix for Emergency Response (ARMER) talkgroups
AgencyDescriptionTalkgroupHexMode
Meeker County SheriffLaw Enforcement Dispatch25500639cD
Meeker County SheriffLaw Enforcement Dispatch25501639dD
Meeker County SheriffLaw Enforcement Roam (1)2551263a8D
Meeker County SheriffJail Operations25503639fD
7 encrypted talkgroups (cannot be monitored)
Allied Radio Matrix for Emergency Response (ARMER) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Meeker County SheriffLaw Enforcement Roam (2)2551363a9D Encrypted
Meeker County SheriffLaw Enforcement Car to Car25502639eD Encrypted
Meeker County SheriffLaw Enforcement Tactical2550463a0D Encrypted
Meeker County SheriffLaw Enforcement Tactical2550563a1D Encrypted
Meeker County Sherifflaw tac (3)2550763a3D Encrypted
Meeker County SheriffMeeker County Sheriff – Tactical Channel2550863a4D Encrypted
Meeker County SheriffMeeker County Sheriff – Tactical Channel2550963a5D Encrypted

Nearest trunked radio sites

Distances are measured from the center of Cedar Mills.

Swift County · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 32 (hex 20) · about 5 mi away
Control 854.9875
Meeker Co. Simulcast · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 4 · Site 43 (hex 2B) · about 11 mi away
Control 852.225, 853.875
Voice 851.1, 852.625, 853.325, 854.5375, 856.0625, 856.4625, 857.4625, 858.4625
Hector · Allied Radio Matrix for Emergency Response (ARMER)
RFSS 2 · Site 86 (hex 56) · about 14 mi away
Control 852.3875, 853.425
Voice 851.425, 851.75, 852.8875, 853.9125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do the police use a trunked radio system in Cedar Mills?

Yes. The county-level systems that cover Cedar Mills are Law-enforcement talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 11 talkgroups. A trunking scanner is required.

What scanner do I need to listen to police in Cedar Mills?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Cedar Mills?

For Cedar Mills, start with the Swift County site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 854.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.