About Roseau County Police Frequencies
Quick answer: Dispatch for Roseau County: Roseau County Sheriff 155.7000 MHz, narrow FM, 114.8 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Roseau County Sheriff talkgroup 50900 (hex c6d4).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Roseau County, start with the Greenbush site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels: 852.9125, 853.2625 MHz.
Data updated .
Roseau County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Roseau County Sheriff | Sheriff's Department | 155.7000 In 154.8900 | 114.8 PL | FMN | WAX493 |
Roseau County trunked talkgroups
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Roseau County Sheriff | Sheriff Patch – 155.7000 | 50900 | c6d4 | D |
| Roseau County Sheriff | Law C2C | 50916 | c6e4 | D |
Radio system sites in Roseau County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Roseau County
- Badger
- Barnett
- Barto
- Beaver
- Cedarbend
- Deer
- Dewey
- Dieter
- Enstrom
- Falun
- Golden Valley
- Greenbush
- Grimstad
- Hereim
- Huss
- Jadis
- Lake
- Laona
- Lind
- Malung
- Mickinock
- Moose
- Moranville
- Nereson
- Palmville
- Pohlitz
- Polonia
- Poplar Grove
- Reine
- Roosevelt
- Roseau
- Ross
- Skagen
- Soler
- Spruce
- Stafford
- Stokes
- Strathcona
- Warroad
Common questions
What frequency do the police use in Roseau County?
Dispatch channels listed for Roseau County: Roseau County Sheriff 155.7000 MHz, narrow FM, 114.8 PL.
What is the sheriff's dispatch frequency in Roseau County?
Roseau County Sheriff 155.7000 MHz, narrow FM, 114.8 PL.
Do the police use a trunked radio system in Roseau County?
Yes. Law-enforcement talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Roseau County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Roseau County?
For Roseau County, start with the Greenbush site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.9125, 853.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Roseau County police frequencies encrypted?
None of the 1 conventional frequencies listed for Roseau County are marked encrypted.
Are Roseau County police talkgroups encrypted?
None of the 2 talkgroups listed for Roseau County are marked encrypted.