Rothsay also extends into Otter Tail County.
About Rothsay Police Frequencies
Quick answer: County-level dispatch that covers Rothsay: Wilkin County Sheriff 155.1150 MHz, narrow FM, 97.4 PL. Trunked: Allied Radio Matrix for Emergency Response (ARMER), for example Wilkin County Sheriff talkgroup 27700 (hex 6c34).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Rothsay, start with the Barnsville site of Allied Radio Matrix for Emergency Response (ARMER), about 10 miles away. Its control channels: 852.4375, 857.2375 MHz.
- 2 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Wilkin County channels that also cover Rothsay
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wilkin County Sheriff | Sheriff's Dispatch – Patch | 155.1150 In 153.9350 | 97.4 PL | FMN | KFK654 |
Allied Radio Matrix for Emergency Response (ARMER)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wilkin County Sheriff | Law Dispatch – Patch 155.115 | 27700 | 6c34 | D |
| Wilkin County Sheriff | Law C2C | 27711 | 6c3f | D |
| Wilkin County Sheriff | Wahpeton Police Department Patch | 27715 | 6c43 | D |
2 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wilkin County Sheriff | Law 1 | 27713 | 6c41 | D Encrypted |
| Wilkin County Sheriff | Law 2 | 27714 | 6c42 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Rothsay.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Rothsay?
We do not have a dispatch channel listed specifically for Rothsay. The county sheriff's dispatch channels in the same county: Wilkin County Sheriff 155.1150 MHz, narrow FM, 97.4 PL.
Do the police use a trunked radio system in Rothsay?
Yes. The county-level systems that cover Rothsay are Law-enforcement talkgroups are listed for Allied Radio Matrix for Emergency Response (ARMER): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Rothsay?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Rothsay?
For Rothsay, start with the Barnsville site of Allied Radio Matrix for Emergency Response (ARMER). Its control channels are 852.4375, 857.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.