Skip to content

Graham Police Frequencies

We do not have frequencies listed specifically for Graham in Nodaway County, Missouri yet. Countywide channels for Nodaway County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Andrew County 700 (Missouri Statewide Wireless Interoperable Network (MOSWIN)), about 11 miles away.

About Graham Police Frequencies

Quick answer: Trunked: Missouri Statewide Wireless Interoperable Network (MOSWIN), for example Nodaway County Sheriff talkgroup 29501 (hex 733d).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Missouri Statewide Wireless Interoperable Network (MOSWIN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Graham, start with the Andrew County 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN), about 11 miles away. Its control channels: 769.15625, 769.40625 MHz.

Data updated .

Nodaway County channels that also cover Graham

Dispatch

Dispatch frequencies for Nodaway County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Nodaway County Public SafetyNodaway County Public Safety – Dispatch155.6700146.2 PLFMNKAF568
Nodaway County Public SafetyNodaway County Public Safety – Dispatch155.7675
In 159.4125
167.9 PLFMNWPZM258

Jails & Corrections

Jails & Corrections frequencies for Nodaway County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Nodaway County Public SafetySheriff/Courthouse Security155.9550FMNKAF568

Missouri Statewide Wireless Interoperable Network (MOSWIN)

Missouri Statewide Wireless Interoperable Network (MOSWIN) talkgroups
AgencyDescriptionTalkgroupHexMode
Nodaway County SheriffAll // Sheriff – Dispatch29501733dD

Nearest trunked radio sites

Distances are measured from the center of Graham.

Andrew County 700 · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 5 · Site 35 (hex 23) · NAC 1CB · about 11 mi away
Control 769.15625, 769.40625
Voice 769.65625, 769.90625, 770.15625, 770.40625
Mound City 700 · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 5 · Site 36 (hex 24) · NAC 1C6 · about 11 mi away
Control 773.06875, 773.31875
Voice 773.56875, 773.81875, 774.06875, 774.31875
Maryville 700 · Missouri Statewide Wireless Interoperable Network (MOSWIN)
RFSS 5 · Site 29 (hex 1D) · NAC 1C5 · about 13 mi away
Control 769.16875, 769.41875
Voice 769.66875, 769.91875, 770.16875, 770.41875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do the police use a trunked radio system in Graham?

Yes. The county-level systems that cover Graham are Law-enforcement talkgroups are listed for Missouri Statewide Wireless Interoperable Network (MOSWIN): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to police in Graham?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Graham?

For Graham, start with the Andrew County 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 769.15625, 769.40625 MHz. Program a control channel first; the scanner finds the voice channels from it.