About Marthasville Police Frequencies
Quick answer: County-level dispatch that covers Marthasville: Warren County Sheriff 155.7075 MHz, P25, NAC 333. Trunked: STARCOM21 Statewide Illinois, for example Warren County Sheriff talkgroup 5576 (hex 15c8).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: STARCOM21 Statewide Illinois: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Marthasville, start with the Washington 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN), about 6 miles away. Its control channels: 773.03125, 773.28125 MHz.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Warren County channels that also cover Marthasville
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Warren County Sheriff | Warren County Sheriff – Dispatch (Simulcast*) | 155.7075 In 159.1875 | NAC 333 | P25 | WRJR856 |
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Warren County Sheriff Expired: Expired 2/22 | Jail Operations | 156.1500 | FMN | KAH614 |
STARCOM21 Statewide Illinois
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Warren County Sheriff | Warren County Sheriff – Dispatch | 5576 | 15c8 | D |
| Warren County Sheriff | Warren County Sheriff – Tactical Channel | 5577 | 15c9 | D |
Nearest trunked radio sites
Distances are measured from the center of Marthasville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Marthasville?
We do not have a dispatch channel listed specifically for Marthasville. The county sheriff's dispatch channels in the same county: Warren County Sheriff 155.7075 MHz, P25, NAC 333.
Do the police use a trunked radio system in Marthasville?
Yes. The county-level systems that cover Marthasville are Law-enforcement talkgroups are listed for STARCOM21 Statewide Illinois: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Marthasville?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Marthasville?
For Marthasville, start with the Washington 700 site of Missouri Statewide Wireless Interoperable Network (MOSWIN). Its control channels are 773.03125, 773.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.