Skip to content

Butte County Police Frequencies

Butte County in South Dakota has 1 countywide conventional frequency and 2 countywide talkgroups in our database. Use the list of 6 cities and communities below for local police departments.

About Butte County Police Frequencies

Quick answer: Dispatch for Butte County: Butte County Sheriff 155.3100 MHz, narrow FM, 85.4 PL. Trunked: South Dakota State Radio System, for example Butte County Sheriff talkgroup 916 (hex 394).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: South Dakota State Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Butte County, start with the Castle Rock site of South Dakota State Radio System. Its control channels: 155.7, 156.135, 158.49 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Butte County conventional frequencies

Dispatch

Dispatch frequencies for Butte County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Butte County SheriffButte County Sheriff – Dispatch – South Repeater155.3100
In 159.2700
85.4 PLFMNWQGJ981

Butte County trunked talkgroups

South Dakota State Radio System

South Dakota State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Butte County SheriffLaw 1916394D
1 encrypted talkgroup (cannot be monitored)
South Dakota State Radio System encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Butte County SheriffLaw 2918396D Encrypted

Radio system sites in Butte County

Program the control channel first; your scanner finds the voice channels from it.

Castle Rock · South Dakota State Radio System
RFSS 1 · Site 50 (hex 32)
Control 155.7, 156.135, 158.49
Voice 158.67
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Butte County

Common questions

What frequency do the police use in Butte County?

Dispatch channels listed for Butte County: Butte County Sheriff 155.3100 MHz, narrow FM, 85.4 PL.

What is the sheriff's dispatch frequency in Butte County?

Butte County Sheriff 155.3100 MHz, narrow FM, 85.4 PL.

Do the police use a trunked radio system in Butte County?

Yes. Law-enforcement talkgroups are listed for South Dakota State Radio System: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to police in Butte County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Butte County?

For Butte County, start with the Castle Rock site of South Dakota State Radio System. Its control channels are 155.7, 156.135, 158.49 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Butte County police frequencies encrypted?

None of the 1 conventional frequencies listed for Butte County are marked encrypted.

Are Butte County police talkgroups encrypted?

1 of the 2 talkgroups listed for Butte County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.