Skip to content

Howard Police Frequencies

We do not have frequencies listed specifically for Howard in Miner County, South Dakota yet. Countywide channels for Miner County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Madison (South Dakota State Radio System), about 20 miles away.

About Howard Police Frequencies

Quick answer: County-level dispatch that covers Howard: Miner County Sheriff 158.7600 MHz, FM, 100.0 PL. Trunked: South Dakota State Radio System, for example Miner County Sheriff talkgroup 1409 (hex 581).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: South Dakota State Radio System: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Howard, start with the Madison site of South Dakota State Radio System, about 20 miles away. Its control channels: 159.78, 160.065 MHz.

Data updated .

Miner County channels that also cover Howard

Dispatch

Dispatch frequencies for Miner County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Miner County SheriffMiner County 911 Dispatch158.7600
In 153.8450
100.0 PLFMKBI814

South Dakota State Radio System

South Dakota State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Miner County SheriffMiner County Sheriff – Dispatch1409581D
Miner County SheriffLaw 11410582D
Miner County SheriffLaw 21411583D
Miner County SheriffFire1413585D

Nearest trunked radio sites

Distances are measured from the center of Howard.

Madison · South Dakota State Radio System
RFSS 1 · Site 28 (hex 1C) · NAC 47C · about 20 mi away
Control 159.78, 160.065
Voice 159.54, 159.915
Mitchell · South Dakota State Radio System
RFSS 1 · Site 11 (hex B) · NAC 470 · about 34 mi away
Control 159, 159.255, 159.84
Voice 155.64, 156.12, 159.45
De Smet · South Dakota State Radio System
RFSS 1 · Site 8 (hex 8) · NAC 478 · about 34 mi away
Control 159.015, 159.33, 159.885
Voice 160.2
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Howard?

We do not have a dispatch channel listed specifically for Howard. The county sheriff's dispatch channels in the same county: Miner County Sheriff 158.7600 MHz, FM, 100.0 PL.

Do the police use a trunked radio system in Howard?

Yes. The county-level systems that cover Howard are Law-enforcement talkgroups are listed for South Dakota State Radio System: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to police in Howard?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Howard?

For Howard, start with the Madison site of South Dakota State Radio System. Its control channels are 159.78, 160.065 MHz. Program a control channel first; the scanner finds the voice channels from it.