About Pea Ridge Police Frequencies
Quick answer: County-level dispatch that covers Pea Ridge: Cabell County Sheriff 453.1250 MHz, P25, NAC 410. Trunked: WV SIRN: West Virginia Statewide Interoperable Radio Network, for example Cabell County Sheriff talkgroup 4107 (hex 100b).
- 3 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
- Trunked radio systems that carry law-enforcement traffic here: WV SIRN: West Virginia Statewide Interoperable Radio Network: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pea Ridge, start with the Huntington site of WV SIRN: West Virginia Statewide Interoperable Radio Network, about 4 miles away. Its control channels: 460.1375, 463.3625 MHz.
Data updated .
Cabell County channels that also cover Pea Ridge
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cabell County Sheriff | Cabell County Sheriff – Dispatch | 453.1250 In 458.1250 | NAC 410 | P25 | WSIK813 |
| Cabell County Sheriff | Disaster Intermediate Response Team – County Police / Fire / EMS Tactical | 453.7000 In 458.7000 | NAC 410 | P25 | WSIK813 |
Talk-around & Car-to-Car
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marshall University | Marshall University Police | 460.0250 In 465.0250 | P25 | WPZY992 |
WV SIRN: West Virginia Statewide Interoperable Radio Network
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Cabell County Sheriff | Cabell County Sheriff – Dispatch | 4107 | 100b | D |
| Cabell County Sheriff | Cabell County Sheriff – Tactical Channel | 4141 | 102d | D |
| Cabell County Sheriff | Cabell County Sheriff – Tactical Channel | 4143 | 102f | D |
| Cabell County Sheriff | Task Force | 4145 | 1031 | D |
| Cabell County Sheriff | Task Force | 4147 | 1033 | D |
| Cabell County Sheriff | Marshall University Police | 4112 | 1010 | D |
| Cabell County Sheriff | Countywide | 4117 | 1015 | D |
| Cabell County Sheriff | Private | 4123 | 101b | D |
| Cabell County Sheriff | Home Confinement | 4182 | 1056 | D |
| Cabell County Sheriff | Marshall University Police – Private | 4183 | 1057 | D |
Nearest trunked radio sites
Distances are measured from the center of Pea Ridge.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Pea Ridge?
We do not have a dispatch channel listed specifically for Pea Ridge. The county sheriff's dispatch channels in the same county: Cabell County Sheriff 453.1250 MHz, P25, NAC 410.
Do the police use a trunked radio system in Pea Ridge?
Yes. The county-level systems that cover Pea Ridge are Law-enforcement talkgroups are listed for WV SIRN: West Virginia Statewide Interoperable Radio Network: 10 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Pea Ridge?
A scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Pea Ridge?
For Pea Ridge, start with the Huntington site of WV SIRN: West Virginia Statewide Interoperable Radio Network. Its control channels are 460.1375, 463.3625 MHz. Program a control channel first; the scanner finds the voice channels from it.