About Tarrytown Police Frequencies
Quick answer: County-level dispatch that covers Tarrytown: Montgomery County Sheriff 155.9250 MHz, NXDN48, RAN 17.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
Data updated .
Montgomery County channels that also cover Tarrytown
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County Sheriff | Montgomery County Sheriff – Dispatch – New | 155.9250 In 153.8075 | RAN 17 | NXDN48 | WSEF709 |
Nearest trunked radio sites
Distances are measured from the center of Tarrytown.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Tarrytown?
We do not have a dispatch channel listed specifically for Tarrytown. The county sheriff's dispatch channels in the same county: Montgomery County Sheriff 155.9250 MHz, NXDN48, RAN 17.
What scanner do I need to listen to police in Tarrytown?
A scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Tarrytown?
For Tarrytown, start with the Emanuel Co Simulcast site of Southeast Georgia Regional Radio Network (SEGARRN). Its control channels are 856.1625, 857.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.