Skip to content

Standish Police Frequencies

We do not have frequencies listed specifically for Standish in Cumberland County, Maine yet. Countywide channels for Cumberland County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Ossipee Mountain (Maine State Communications Network (MSCommNet)), about 12 miles away.

About Standish Police Frequencies

Quick answer: County-level dispatch that covers Standish: Cumberland County Sheriff 151.1075 MHz, narrow FM, 107.2 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Cumberland County channels that also cover Standish

Dispatch

Dispatch frequencies for Cumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cumberland County SheriffSheriff Primary151.1075107.2 PLFMNWQKL978

Jails & Corrections

Jails & Corrections frequencies for Cumberland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cumberland County SheriffCumberland County Jail453.0500
In 458.0500
CC 1 · TG 101 · SL 1DMRWNGY225

Nearest trunked radio sites

Distances are measured from the center of Standish.

Ossipee Mountain · Maine State Communications Network (MSCommNet)
RFSS 61 · Site 61 (hex 3D) · NAC 3DE · about 12 mi away
Control 160.65, 160.95, 170.1, 172.625, 173.425
Hosac Mountain · Maine State Communications Network (MSCommNet)
RFSS 85 · Site 85 (hex 55) · NAC 55E · about 13 mi away
Control 154.7025, 157.515, 171.65, 172.525, 173.825
Gray RCC · Maine State Communications Network (MSCommNet)
RFSS 35 · Site 35 (hex 23) · NAC 23E · about 14 mi away
Control 150.8825, 152.2475, 155.655
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Standish?

We do not have a dispatch channel listed specifically for Standish. The county sheriff's dispatch channels in the same county: Cumberland County Sheriff 151.1075 MHz, narrow FM, 107.2 PL.

What scanner do I need to listen to police in Standish?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Standish?

For Standish, start with the Ossipee Mountain site of Maine State Communications Network (MSCommNet). Its control channels are 160.65, 160.95, 170.1, 172.625 MHz. Program a control channel first; the scanner finds the voice channels from it.