About Buxton Police Frequencies
Quick answer: Dispatch for Buxton: Buxton Police 153.8450 MHz, narrow FM, 103.5 PL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Biddeford Municipal Trunk: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Buxton, start with the Ossipee Mountain site of Maine State Communications Network (MSCommNet), about 11 miles away. Its control channels: 160.65, 160.95, 170.1 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Buxton conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Buxton Police | Buxton Police – Dispatch | 153.8450 In 159.0750 | 103.5 PL | FMN | WSL473 |
York County channels that also cover Buxton
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| York County Sheriff | York County Sheriff – Dispatch | 154.9950 In 153.7850 | 192.8 PL | FMN | KNBF233 |
Talk-around & Car-to-Car
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| York County Sheriff | Channel Tactical Direct | 155.1600 | FMN | KNBF233 | |
| York County Sheriff | York Sheriff's Office Operations | 160.4100 In 159.8100 | 156.7 PL | FMN | KNNN554 |
Jails & Corrections
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| York County Sheriff | Alfred Jail | 155.8500 | 110.9 PL | FMN | WNZE893 |
Biddeford Municipal Trunk
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Police | Police Operations | 101 | 65 | T Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Buxton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Buxton?
Dispatch channels listed for Buxton: Buxton Police 153.8450 MHz, narrow FM, 103.5 PL.
Do the police use a trunked radio system in Buxton?
Yes. The county-level systems that cover Buxton are Law-enforcement talkgroups are listed for Biddeford Municipal Trunk: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to police in Buxton?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Buxton?
For Buxton, start with the Ossipee Mountain site of Maine State Communications Network (MSCommNet). Its control channels are 160.65, 160.95, 170.1, 172.625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Buxton police frequencies encrypted?
None of the 1 conventional frequencies listed for Buxton are marked encrypted.