Skip to content

Dayton Police Frequencies

We do not have frequencies listed specifically for Dayton in York County, Maine yet. Countywide channels for York County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Ossipee Mountain (Maine State Communications Network (MSCommNet)), about 12 miles away.

About Dayton Police Frequencies

Quick answer: County-level dispatch that covers Dayton: York County Sheriff 154.9950 MHz, narrow FM, 192.8 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry law-enforcement traffic here: Biddeford Municipal Trunk: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Dayton, start with the Ossipee Mountain site of Maine State Communications Network (MSCommNet), about 12 miles away. Its control channels: 160.65, 160.95, 170.1 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

York County channels that also cover Dayton

Dispatch

Dispatch frequencies for York County
AgencyDescriptionFrequency (MHz)ToneModeFCC
York County SheriffYork County Sheriff – Dispatch154.9950
In 153.7850
192.8 PLFMNKNBF233

Talk-around & Car-to-Car

Talk-around & Car-to-Car frequencies for York County
AgencyDescriptionFrequency (MHz)ToneModeFCC
York County SheriffChannel Tactical Direct155.1600FMNKNBF233
York County SheriffYork Sheriff's Office Operations160.4100
In 159.8100
156.7 PLFMNKNNN554

Jails & Corrections

Jails & Corrections frequencies for York County
AgencyDescriptionFrequency (MHz)ToneModeFCC
York County SheriffAlfred Jail155.8500110.9 PLFMNWNZE893

Biddeford Municipal Trunk

1 encrypted talkgroup (cannot be monitored)
Biddeford Municipal Trunk encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
PolicePolice Operations10165T Encrypted

Nearest trunked radio sites

Distances are measured from the center of Dayton.

Ossipee Mountain · Maine State Communications Network (MSCommNet)
RFSS 61 · Site 61 (hex 3D) · NAC 3DE · about 12 mi away
Control 160.65, 160.95, 170.1, 172.625, 173.425
Portland Simulcast · Portland
RFSS 1 · Site 1 (hex 1) · NAC 8A1 · about 18 mi away
Control 852.7875, 853.2875, 853.5375, 853.7875
Voice 851.0625, 851.2875, 851.3125, 851.5625, 851.7875
City Center · Maine State Communications Network (MSCommNet)
RFSS 101 · Site 101 (hex 65) · NAC 3DE · about 18 mi away
Control 152.06, 171.1625, 171.3125, 171.625, 172.3125, 172.625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency do the police use in Dayton?

We do not have a dispatch channel listed specifically for Dayton. The county sheriff's dispatch channels in the same county: York County Sheriff 154.9950 MHz, narrow FM, 192.8 PL.

Do the police use a trunked radio system in Dayton?

Yes. The county-level systems that cover Dayton are Law-enforcement talkgroups are listed for Biddeford Municipal Trunk: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to police in Dayton?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Dayton?

For Dayton, start with the Ossipee Mountain site of Maine State Communications Network (MSCommNet). Its control channels are 160.65, 160.95, 170.1, 172.625 MHz. Program a control channel first; the scanner finds the voice channels from it.